ISO Certified Series Vacuum Conveyor of Powder and Granular Materials

Basic Info.

Model NO.	NM-005
Max Feeding (mm)	630
Capacity(t/h)	150-300
Motor Power(kw)	10~20
Installation Slope	Adjustable
Chute size(mm)	2140*1150*1280
Overall Dimension	2140*1150*1280
Transport Package	Wooden Case
Specification	SUS316L, DN80 mm, D650 mm
Trademark	9M
Origin	China
HS Code	8428200000
Production Capacity	10000 PCS Each Year

Product Description

Product Description
High Quality ISO certified Vacuum Conveyor of powder and granular materials

Equipment Detailed Description
1	Silo Material:	SUS316L, Thickness: 3mm
	Sealing ring:	Silicone Rubber
	Suction Caliber:	DN80 mm
	Silo Diameter:	Φ650 mm
2	DN250 Wafer Pneumatic Unloading Valve	Pneumatically controlled wafer butterfly valve, the butterfly valve can prevent viscous materials from sticking to the discharge port and affect the vacuum degree. Compressed air is used as the power source, and the working pressure is 5-6kg.
	Material:	SUS316L stainless steel
3	Filtering Device: Ti07 Filter	Ti07 Filter
	material:	FDA certified.
	Specification	φ350x500mm.
	Maximum working temperature:	80ºC.
	Maximum cleaning temperature:	120°C.
4	External Recoil Device	It is used to clean the filter: the filter is blown back when discharging to prevent the powder from sticking to the filter and causing the filter to block.
	Standard volume:	0.75 liters,Compressed air is used as the power source.
5	Grounding device:	Eliminate the static electricity generated during the transportation of materials.
6	Pneumatic Vibrator	It helps the material discharge more smoothly and faster, and prevents the material from sticking to the inner wall of the cylinder after absorbing moisture. The vibration intensity can be adjusted, the vibrator only works when discharging, and compressed air is used as the power source.
7	Conveying Capacity:	3000kg/h
8	Power:	11KW

Application of vacuum conveying equipmentThe vacuum conveying equipment is specially designed to solve the conveying problem of powder and granular materials, and the minimum particle size to be conveyed is 0.5μm. The equipment adopts electric vacuum pump or pneumatic venturi pump as the power source, and uses the negative pressure generated by the vacuum pump to achieve the purpose of conveying materials.
Suggestions for safety useWhen using the company's vacuum conveying equipment, be sure to read this manual carefully, and operate in strict accordance with the requirements and working procedures of the manual. All safety requirements for pneumatic equipment are valid here during the use of vacuum conveying equipment.
Working PrincipleThe electric vacuum pump generates vacuum in the filter bin through the switching of the vacuum switching valve, so that the material is sucked into the filter bin by vacuum; the filter in the filter bin blocks the material in the bin to ensure that the material will not enter the vacuum pump. Through the weight of the material, the discharge valve at the bottom of the equipment and the vibrator that assists in unloading, the material is smoothly put into the container to be loaded. After discharging, the filter is cleaned by the gas recoil of the recoil air bag.

C